LG TV Repair & Service Center
Reliable repair solutions for LG OLED, QNED, NanoCell, UHD 4K, and webOS Smart TVs. Diagnosing power supply relay clicks, purple screen tint, motherboard faults, and Wi-Fi errors.
LG Multi-Series Coverage
OLED C/G/B • QNED • NanoCell • 4K UHD • Smart webOS
Relay & Power
Click Shutoff CheckBacklight Spectrum
Blue Tint DiagnosiswebOS Board
Boot & eMMC FixOLED / NanoCell
Panel Signal TestingLG TV Series We Service
Professional hardware service for modern LG smart screens and traditional LED televisions.
LG OLED & QNED Series
Precision electronics service for self-lit OLED pixels, Alpha 7/9 AI Gen processors, power timing boards, and MiniLED backlight arrays.
- OLED C-Series (C9, CX, C1, C2, C3)
- QNED80, QNED85 MiniLED models
- Power shutoff protection diagnostics
LG NanoCell 4K Smart TVs
Repairing NanoCell color filtration issues, local dimming drivers, webOS boot cycling, and main logic board component failures.
- NANO75, NANO80, NANO86 models
- Magic Remote sensor module repairs
- HDMI 2.1 120Hz port diagnostics
LG 4K UHD & Smart LED TVs
Cost-effective repair for popular 32", 43", 50", and 55" LG UHD TVs (UQ, UR, UP, and UN series). LED backlight replacement and sound repairs.
- Purple / blue screen tint correction
- Wi-Fi turned off connection fixes
- Speaker distortion and audio IC repair
Common LG TV Problems We Troubleshoot
Experienced diagnostics for characteristic LG display and board failure symptoms.
Purple or Blue Tinted Display
The screen takes on an unnatural blue or purple color hue due to backlight phosphorus breakdown. Resolved by full LED strip replacement.
Relay Clicking & Won't Turn On
Audible relay clicking sound from the power board, but television immediately turns back to standby mode without picture.
Stuck on "LG Life's Good" Logo
The TV boots up, displays the LG corporate logo, and freezes or restarts continuously due to corrupted webOS flash memory.
Wi-Fi & Magic Remote Disconnects
Screen displays "Wi-Fi is turned off to save power" and the Magic Remote cursor fails to appear. We repair the Wi-Fi/Bluetooth board.
Blank Screen With Audio Working
TV sound plays normally, but screen is pitch black. Backlight LED driver or LED strips have burnt out.
Horizontal Lines Across Panel
Fine or thick lines across the screen caused by panel driver chips (COF) or T-Con timing controller signal errors.
Cracking Sound or Muted Audio
Speaker cones tear or internal audio amplifier IC fails, causing buzzing, distortion, or complete loss of sound.
HDMI "No Signal" on All Ports
Set-top box or fire stick not recognized after lightning surge or voltage spike. We repair HDMI switch IC circuitry.
Schedule LG TV Inspection
Submit your LG television details for fast response. Our technicians will review the symptoms, check part compatibility, and schedule an inspection.
We use verified replacement parts for LG power supply units, pure white LED backlight strips, and webOS motherboard ICs.
Book TV Repair & Inspection
Submit your TV problem details for quick technical review and consultation.
Frequently Asked Questions — LG TV Repair
Answers to common questions regarding LG TV symptoms, repairs, and service timelines.
A distinct purple or bluish tint on an LG LED TV occurs when the phosphorus coating on the internal LED backlight strips degrades over time from heat and usage, causing the underlying ultraviolet/blue LEDs to show through. We resolve this by replacing the entire backlight array with fresh, balanced white LED strips.
The clicking sound is the internal power supply relay trying to initiate startup. When the power board detects a short-circuit on the secondary output rails, inverter, or main motherboard, it trips into safety shutdown mode. Our technicians test the power board and relay circuits to repair the fault.
Yes. We repair LG OLED series (including C1, C2, C3, B-series, G-series), LG QNED MiniLED, and LG NanoCell 4K televisions, diagnosing power boards, T-Con modules, and webOS logic boards.
This is a well-known issue in many LG Smart TV models caused by a pinched or oxidized ribbon cable connecting the Wi-Fi/Bluetooth receiver board at the bottom of the TV, or failure of the Wi-Fi module itself. We clean, realign, or replace the Wi-Fi/Bluetooth assembly.